KENWOOD COMPACT 4-CHANNEL POWERSPORTS/MARINE AMPLIFIER — 50 WATTS RMS X 4]

Power for your music on land or sea
Kenwood’s compact kac-m5014 four-channel marine and powersports amplifier delivers a solid 50 watts rms per channel, over-powering noise from wind, water, or the trail, and adding clarity and impact to your music. The amp features conformal-coated circuit boards and protective covers for its connections, so the music won’t stop just because the amp got a little wet or dirty.

Works with almost any system
The kac-m5014 will accept an input signal from just about any source, whether it’s rca cables from an aftermarket receiver or the high-level speaker wiring from a factory radio. The high-level inputs can sense the signal and turn the amplifier on, so you won’t need to run a separate remote turn-on lead from the receiver or factory fuse box. The amp’s high- and low-pass filters let you tune the sound to match your speakers and their locations.

Specifications:

• Compact 4-channel powersports/marine amplifier
• 50 watts rms x 4 at 4 ohms
• 75 watts rms x 4 at 2 ohms
• 150 watts rms x 2 bridged at 4 ohms
• Class d amp technology
• Variable high- and low-pass filters (50-200 hz, 12 db/octave)
• Conformal-coated circuit boards
• Preamp and speaker-level inputs
• Speaker wire to rca adapter required for speaker-level input
• Signal-sensing turn-on with speaker-level inputs
• Wiring and hardware not included with amplifier
• 8-gauge power and ground leads recommended
• Fuse rating: 40a x 1
• Dimensions: 9-3/4″w (including wiring) x 2″h x 4-3/16″d

What’s in the box:

• Kenwood kac-m5014 owner’s manual
• 4-channel moto-marine amplifier
• Power/ground/input-output harness (installed) w/ inline 40a atc fuse
• Four 5/8″ screws
• Two 4″ wire ties
• Instruction manual
• Warranty information

* Territorial Restriction Applies *​​