East Coast USA Distributors     (516) 326-1560
Kenwood KAC-9106D

Kenwood Class D Mono Amplifier, 2000 Watts Max

PART#: KAC-9106D

Login to View Pricing
      • Class D Mono Amp
  • 2000 Watts Max power
  • 4 ohms 500W x 1 RMS
  • 2 ohms 1000W x 1 RMS
  • Signal to Noise Ratio: 100 dB1
  • Low Pass Filter: 50 - 200 Hz (-24 dB / oct.)1
  • Infrasonic Filter: 20 - 50 Hz (-24 dB / oct.)1
  • Bass Boost: 40 Hz (0 - +18 dB)1
  • Size(inch): (W)13-3/16" x (H)2-3/16" x (D)7-9/16"1
  • Weight(lbs): 6.2
  • Speaker level input
  • Bass boost


TitleClass D Mono Power Amplifier
Amplifier TypeClass D
CEA-2006 Primary RatingsPower Output500Watts RMS x 1 at 4 Ohms and ≤1%THD+N
Signal-to-Noise Ratio76dBA (Reference: 1Watt into 4Ohms)
Maximum Power OutputMAX POWER2000W
Power OutputRated Power at 14.4V500Watts RMS x [ch] (4 Ohms, 20-200Hz, ≤1.0% THD)
1000Watts RMS x [ch] (2 Ohms, 100Hz, ≤1.0% THD)
SpecificationsSignal to Noise Ratio100dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response20Hz-200Hz (+0dB, -3dB)
Class D
Input Impedance10k ohm
Speaker Impedance4Ω (2Ω to 8Ω allowable)
Audio Section

Low-Pass Filter

Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct)
Infrasonic FilterBuilt in Variable Infrasonic Filter (20Hz-50Hz, -24dB/oct)
Bass BoostBuilt in Bass Boost Control (40Hz, 0dB-+18dB)
RCA Input Sensitivity0.2[V] - 5.0 [V]

Speaker Level Input Sensitivity

4.0[V] - 12.0 [V]
TerminalsBattery & GroundScrew Type Terminal Block (Ni) (M6)
Speaker OutputScrew Type Terminal Block (Ni) (M4)
Line InRCA (Ni)
Line OutRCA (Ni)
Speaker InputJST Connector
GeneralDimensions(WxHxD)335 [mm] x 56 [mm] x 192 [mm]
13-3/16 inch x 2-3/16 inch x 7-9/16 inch
Weight (kg)2.8 [kg] 6.2 [lbs]
Operating Voltage14.4V(11-16V allowable) [V]
Current Consumption65 [A]
Key Features

CEA-2006 Compliant
Class D
2 Ohms Load Capability
Speaker Level Input
Signal Sensing Turn-on
Terminal Cover
Power MOS-FET Switching Power Supply
Cast Aluminum Heat Sink Design
Line Output Terminals for Extension


Triangle Indicator